*Image is a representation of this item. Actual item may vary.

CP3 - 10mm Super Stock - Engineered Diesel - Cummins 5.9l & 6.7L 2003 - Present

E.D Part # EDCED0110C10MM

Due to high demand, allow 5 to 10 business days before item can ship

NO CORE FEE!

FREE Standard shipping for lower 48!

Engineered Diesel is the only manufacturer in the industry to use high flow suction valves. This gives us the highest flowing 10mm CP3 on the market! All pumps are bench tested after assembly to ensure the highest quality on the market!

- Supports 850hp on a single pump application!

- Plungers are DLC coated

- Polygon is DLC coated

- Cam is Rockwell 65 hardness

- Lifters are Rockwell 65 hardness

- Micro Polished lifters

- Highflow suction valves

- Modified housing for increased case pressure resulting in better plunger fill rate

- We back our Super Stock pumps with a 2yr warranty against manufacturer defects!

(Warranty Applies to Original Purchaser Only. Does not cover contamination)

*Built off of a 6.7L pump. Feed line modifications are necessary when installing onto a 5.9L*

The 6.7L supply inlet is in the rear of the case instead of the side of the case (like the 5.9L). When using an aftermarket lift pump, you can reroute the fuel hose like in the picture below or change to a straight fitting.

Replaces Bosch part # 0986437334, 0 986 437 334, 986437334, 0445020146, 0 445 020 146, 445020146, 0986437304, 0 986 437 304, 986437304